INTUMEX® Asia Pacific  - No chance for fire
 
SUPALUX® - Introduction email   home




Also look:
Etex Group
Fire Stopping
 
Click for other
Intumex
  Products



 

D I M E N S I O N A L   S T A B I L I T Y

SUPALUX® has extremely good dimensional stability even when used in humid environment, or conditions with continuously changing temperatures.

 
C H E M I C A L

SUPALUX® is not affected by brine and diluted chlorine solutions. It is resistant to low concentration of most acids, alkalis, bleaching agents and solvents.

 
F I R E   P E R F O R M A N C E

SUPALUX® is non-combustible to BS 476: Part 4: 1970. It has Class 1 Surface spread of flame to BS 476: Part: 1971 and Class 0 surfaces as defined in most Building Regulations. It contains no soluble ingredients and its fire performance is not degraded by age. SUPALUX® does not generate smoke or toxic gases during fire.

 
B I O L O G I C A L

Resistant to attack by insects or vermin, and does not nourish mould growth.

 
 

SUPALUX® consists of a calcium silicate matrix reinforced with selected fibres and special fillers. It does not contain asbestos or other inorganic fibres .

The board is cured in a high pressure steam autoclave, thus providing high dimensional and chemical stability with low alkalinity.

 

SUPALUX® calcium silicate board is off-white in colour with a sanded fair surface and lightly textured on reverse. 

T H E R M A L



SUPALUX® experiences very low movement in relation to temperature change. It provides some degree of thermal insulation; and is an ideal support for thermal insulation material

 
P R O V E N

Over the years, SUPALUX® has successfully established its brand through a proven track record in thousands of major projects around the world.

 
E F F E C T   O F   M O I S T U R E

SUPALUX® is tolerant to moisture. It will absorb water causing some strength loss, which is fully recovered upon drying. Moisture has no permanent effect, nor cause leaching or efflorescence from the board.

 
E A S E  O F  U S E

SUPALUX® is lightweight and it can be cut or drilled using conventional woodworking tools. The board has low alkalinity; and is compatible with all common building materials. It is ready to accept most decorative finishes, without any anti-alkaline primer. Please consult Intumex Asia Pacific for specific details.

 
D U R A B I L I T Y

When left undecorated, the board will not degrade, rot or deteriorate physically.

 


    © Copyright 2009 Intumex Asia Pacific. All rights reserved