Where Fire Stops
Other
  Intumex
  Products

Also look:
Etex Group

 
SUPALUX® - Ceilings email
home

SUPALUX® can be used for non-combustible ceilings or fire-rated ceilings providing up to 240 minutes fire resistance. The wide range of ceilings with various options such as seamless and expressed joint details can be achieved using SUPALUX® boards. In instances where a SUPALUX® ceiling needs to be walked upon, a trafficable ceiling consisting of SUPALUX® and DURASTEEL® can also be installed (please contact Intumex Asia Pacific for further details).

Common SUPALUX® ceilings can be suspended or self-supported depending on requirements.

* For more detail, roll your cursor over the individual numerals in the three drawings below.


25mm x 25mm x 0.9mm thick angle bracket bolted to hanger angle and fixed to concrete soffit by HILTI HSA M6/100 steel anchors
9mm thick SUPALUX® board fixed using 32mm long No.8 self-tapping screws at 300mm centres
50mm x 27mm x 0.6mm thick cross channels at maximum 2440mm centres
50mm x 27mm x 0.6mm thick main channels at 610mm centres
50mm wide x 9mm thick SUPALUX® fillets are fixed to channel using 15mm long No.8 self-tapping screws at 300mm centres
19mm x 32mm x 0.5mm thick decorated perimeter steel angle fixed using 32mm long No.8 self-tapping screws and non-combustible plugs at 350mm centres
25mm x 25mm x 0.8mm thick hanger angles spaced at 1220mm centres along main channels and bolted together at the bottom
1220mm (from A to B)
1220mm (from A to B)
610mm (from D to E)
610mm (from E to F)
610mm (from F to G)
610mm (from G to H)
50mm x 40mm x 0.6mm thick steel channel at 610mm centres
75mm x 40mm x 5mm thick steel channel fixed back to back at 1m centres
75mm x 40mm x 5mm thick perimeter steel channel
1 layer of SUPALUX® fillet 9mm thick x 80mm wide
2 layers of SUPALUX® fillet 6mm and
9mm thick x 80mm wide
40mm x 40mm x 5mm thick steel angle horizontal restraint at mid span
1 layer of SUPALUX® fillet 9mm thick x 40mm wide
2 layers of SUPALUX® board 9mm thick
9.5mm thick DURASTEEL® panel
100mm wide x 9.5mm thick DURASTEEL® fillet
50mm x 40mm x 0.6mm thick steel channel at 610mm centres
75mm x 40mm x 5mm thick steel channel fixed back to back at 1m centres
75mm x 40mm x 5mm thick perimeter steel channel
1 layer of SUPALUX® fillet 9mm thick x 80mm wide
2 layers of SUPALUX® fillet 6mm and
9mm thick x 80mm wide
75mm x 40mm x 5mm thick steel channel horizontal restraint at mid span
9mm thick SUPALUX® board
60 minute fire resistant SUPALUX®
self supporting membrane ceiling
  


NOTES:

  • Two layers of 50mm thick 40kg/m3 density mineral wool omitted for clarity.

  • This construction is suitable for providing a fire performance in accordance with the criteria of BS 476: Part 22:1987.

  • Dimensions of items (1) and (2) are determined by the span of the ceiling. Please consult Intumex Asia Pacific in order to ascertain correct frame width dimensions commensurate with span of opening.

  • Mineral wool thickness and density are minimum requirements, please consult Intumex Asia Pacific for complete details of local equivalents.

 


  120 minute fire rated SUPALUX® suspended ceiling
 


NOTES:

  • 30mm thick 64kg/m3 density or 50mm thick 40kg/m3 density mineral wool omitted for clarity.

  • This construction is tested in accordance with the criteria of BS 476: Part 23:1987.
    For applications which require a performance in accordance with the criteria of BS 476: Part 22:1987, please consult Intumex Asia Pacific.

  • Mineral wool thickness and density are minimum requirements, please consult Intumex Asia Pacific for details of local equivalents.


120 minute fire rated SUPALUX®
self supporting membrane ceiling
  


NOTES:

  • 80mm thick 144kg/m3 density mineral wool omitted for clarity.

  • This construction is suitable for providing a fire performance in accordance with the criteria of BS 476: Part 22:1987.

  • Dimensions of items 5, 7, 8 and 9 are determined by the span of the ceiling. Please consult Intumex Asia Pacific in order to ascertain correct frame width dimensions commensurate with span of opening.

  • Mineral wool thickness and density are minimum requirements, please consult Intumex Asia Pacific for complete details of local equivalents.

 


© Copyright 2010 Intumex Asia Pacific. All rights reserved.